| Set as Homepage | Save desktop | Mobile | QR code
33

Hongbao group CO.LTD

Main Products: Titanium Ingot,Titanium Rod/Bar,Titanium Products

News
Product Categories
Search
 
Honor
Friendly link
  • No Links
You are now at: Home » Product » 6301 2RS ball bearing
6301 2RS ball bearing
Large
Products: Hits: 136301 2RS ball bearing 
Price: 1.00$/
Min. Order: 1
Total Quantity: 100000000
Delivery: 3 days after payment
Valid until: Never Expire
Updated: 2018-05-08 12:26
  Inquiry
Details
 . Grade: SUS201,SUS304,SUS316,A2-70,A2-80,A4-80,4.8 6.8 8.8 10.9 12.9

2. Size: M3-48

3. Standard: DIN 315

4. Certification: ISO9001, SGS, CTI, ROHS


Features:
a、Lower speed than the ball bearing with the same dimension
b、High precision
c、Low noise and small vibration
d、Mainly withstand radial load
e、Can withstang a litter axial load if outer ring and inner ring have ribs


Deep Groove Ball Bearings

TG manufacture a full range of deep groove ball bearings. These bearings are the most common type and are used in a wide variety of applications.





Design Attributes :

Newly developed seals (double-lip labyrinth RS2): Improved protection against contamination with low friction, better grease retentionNew, special low-noise lubricant: Lower starting torque over a wide range of temperatures

Superior surface finish on raceways: Reduced friction, lower operating temperature

Closer grade balls: More uniform running and lower noise

Reduced running noise: Through 100% noise testing with stringent limit values







Technical data of the lubricant









Typical applications:

electrical motors

general machinery

industrial gearboxes

pumps

agricultural machinery

Etc.









Product List



Single-Row Deep Groove Ball Bearings







Pressed Steel Cages Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.



In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.



For big deep groove ball bearings, machined brass cages are used.



Machined cages are also used for high speed applications.









Extra Small Ball Bearings and Miniature Ball Bearings







Extra Small Ball Bearings and Miniature Ball Bearings Miniature and instrument ball bearings can be divided into two basic types, deep groove and angular contact. The first (deep groove) can be further divided into the following five classes depending on their design details:



Standard type

Flanged outer ring

Extended inner ring

Expanded type in which one ring has a radial thickness that is larger than normal compared with the bearing width.

Thin section type in which both rings are extra thin in the radial direction. They can also be classified as: open, shielded, or sealed.









Maximum-Type Ball Bearings



Maximum-Type ball Bearings contain a larger number of balls than normal deep groove ball bearings because of filling slots in the inner and outer rings. Because of their filling slots, they are not suitable for applications with high axial loads. BL2 and BL3 types of bearings have boundary dimensions equal to those of single-row deep groove ball bearings of Series 62 and 63 respectively. Besides the open type, ZZ type shielded bearings are also available. When using these bearings, it is important for the filling slot in the outer ring to be outside of the loaded zone as much as possible. Their cages are pressed steel.







Magneto Bearings



The inner groove of magneto bearings is a little shallower than that of deep groove bearings. Since the outer ring has a shoulder on only one side, the outer ring may be removed. This is often advantageous for mounting. In general, two such bearings are used in duplex pairs. Magneto bearings are small bearings with a bore diameter of 4 to 20 mm and are mainly used for small magnetos, gyroscopes, instruments, etc. Pressed brass cages are generally used.



Deep Groove Ball Bearings
Double row cylindrical roller bearings full performance characteristics

TWB SL04 series double row full complement cylindrical roller bearing mainly used to sheave, as it has large radius load capacity and shock-proof ability as well as axial load capacity in both directions.

Comprising one outer ring and two inner rings, the bearing is assembled as a unit by an internal locking structure. The width of the outer ring is less than total width of two inner rings by 1 mm, two snap rings are fitted on the outer ring, oil grooves and holes are made at contact face of two inner rings, therefore the bearing application design is simplified. On both sides of the bearing mounted are steel seals, or optional rubber seal or nylon seals. All outside surfaces of the bearing components are phosphate to ensure the bearing able to work in the open air.

Application

Electric motors, machine tools, construction machineries, light industry machineries, paper machineries, textile machineries, etc.



Main
Products pillow block bearings


Deep groove ball bearing

Tapered Roller Bearing

Stainless steel bearing

linear bearings

2
ID size 30MM-1000MM
3 Certificate ISO9001
4 Material GCr15/GCr15SiMn / Stianless steel
5 Cage Steel
6 Hardness HRC60-HRC64
7 Closures Unsealed/Sealed
8 Grade P0 P6 P5 P4
9 Clearance C0,C3,C4
10

Lubrication
Lubrication Groove &3 Holes in Outer Ring
11 Structure

Single-row tapered roller bearings
Double-row tapered roller bearings
Four row tapered roller bearings

12 Features
Dimensional stability
Long life even in contaminated lubricant
Durable steel cage

13 Packing
1. For small ones:anti-rust oil+vacuum plastic bag+paper box+wooden box
2. For big ones:anti-rust oil+waterproof belt+professional belt+wooden box

14

Application

Tapered roller bearings are widely used in gear drives and reducers, automotive front and rear axles, guide box in bar and rod mills, conveyor and transfer equipments and so on.

Product Name
Best stainless steel wing nut anchor bolt for construction fastener
Material
stainless steel
Color
nickel white
Standard
DIN GB ISO JIS BA ANSI
Grade
SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4.8 6.8 8.8 10.9 12.9
Brade
Rock
Thread
coarse, fine
Used
building industry machinery
Products Show
Our Service

High quality

Passed the ISO9001:2008 quality system authentication and ROHS authentication.

High quality

Passed the ISO9001:2008 quality system authentication and ROHS authentication.

High quality

Passed the ISO9001:2008 quality system authentication and ROHS authentication.

Our Company

Factory

Our Factory

Workshop

Our Workshop  



Management System

DNV ISO9001:2008 certification

DNV ISO14001:2004 certification

DNV OHSAS18001:2007 certification

TQM system

Warehouse

Our Warehouse

Team

Our Team

Enquiry
Total: 0  Related Reviews